Online iPhone iOS 4.0 Jailbreak and Unlock service

There are many people and blogs who tell you how to jailbreak your iPhone 3G / 3Gs and unlock it for any carrier too. However many people face various issues while doing so.

We are offering online virtual assistance in upgrading your apple iPhone / iPod.

How does it work? you just need to connect your iPhone to your computer via usb and just leave rest to us! We will be accessing your computer remotely and securely and will do everything ourself.

Don’t worry, you will be seeing everything we will do on your computer screen and you will have power to disconnect and close remote connection at any time you want.

To discuss and get virtual assistance in unlocking / jailbreaking your iPhone 3G / 3Gs please comment here and we will contact you .

147 Responses to Online iPhone iOS 4.0 Jailbreak and Unlock service

  1. Luis

    I’ll appreciate any help you can provide me. I’d read iclarified, and modmyi forums through and through and nobody seems to have the problem I do. I’d succesfully installed and jailbroken iOS4 on my 8gb 3G, but as far as unlocking, I’ve tried everything to no avail:
    redsn0w>ultrasn0w, pwnage tool, pwanage tool>ultrasn0w

    What am I doing wrong?!

  2. mitch

    Hi,

    3gs, on 3.1.3, BB 5.13.04… BL 6.4
    I would like to go to 4.0, I only have 3.1.3 shsh backed up on Cydia, currently not JB’d. I understand i must first JB my 3.1.3, i think i can handle the rest… ANy help you could provide would be stellar! everytime i try redsnow, it says the rest of the process will take place on my device, but my device just sits there in recovery with a black screen… using recboot restarts me back to 3.1.3 (not JB’d) AHHHHH, HELP PLZ!!!!

  3. Nabeel

    is your issue solved now?

    and what error you get while trying to unlock it?

  4. Nabeel

    you have to upgrade your iphone to latest os and then jailbreak it

    but u need to have the activated iphone.

  5. Luis

    Thanks for answering.
    I don’t get any errors, it just doesn’t work. It keeps saying “no service”. I’m trying to figure out what is the version of bootloader, although I haven’t read anywhere that this is a problem regarding the iPhone 3G.

    the serial is MB, and the week is 44. Everything works fine besides that, multitasking, folders, wi-fi, etc.

  6. Mitch

    Hey! Thanks for the reply! I can go to 4.0 no prob, but how do I jb? The new tools say I must be previously jailbroken…

  7. Chris

    Hello, I´ve got an apple iphone 3g (16gb) on software os 4.0 (updated 23 June) and baseband 5.13.04. The carrier is Orange France, and since I want to use it in Germany (with a German simcard) I need to unlock it. As I´m really not good with computers I could need some virtual assistance.

    Thanks in advance, Chris.

  8. Nabeel

    oh so your bluetooth and wifi don’t work too?

    probably you need to activate it using At & T sim before jailbreaking it then.

  9. Nabeel

    what’s your current OS versin?

  10. Nabeel

    Is it currently activated iPhone?

  11. Chris

    I mean I can use it as ipod and internet and stuff, but I can´t use it as a phone, cause I don´t know the pin of my old orange france simcard…

  12. Chris

    and of course I still can connect it to my itunes.

  13. Nabeel

    isn’t the pin of all the sims same? or can’t you call them to confirm it?

  14. Luis

    bluetooth, wifi, everithing work just fine. I live in the Dominican Republic, not at&t here.

  15. Chris

    typed the pin wrong too often and now need the puk and don´t know where to get this. but i m sure that i can borrow an orange france simcard of a friend. but do i really need to know the pin?

  16. Nabeel

    you can get puk code by calling the service provider

    once you enter puk your pin gets reset.

  17. Matt Leonhardt

    So I have an iPhone 3gs 16gb that is updated to 4.0 with nothing backed up. Is it possible to jailbreak and/or unlock? Thx for the help.

  18. Nabeel

    is it activated?

  19. Matt Leonhardt

    Yes it is activated and currently on Att.

  20. Nabeel

    then it can be .

    do you want assistance in jailbreaking and unlocking it?

  21. Nabeel

    it should be able to be unlocked using redsn0w

    do you want my assistance with it?

  22. Leer

    could you say the steps to jailbreak this because i have a 3gs 16gb 4.0 activated phone and i would like to jailbreak it

  23. Luis

    Can’t reply directly to you.
    I have even used another sim with an iPhone plan in my country to use ultrasn0w and NADA, nothing.
    I just want to use the freaking phone, whatever it is on 4, 3.1.2, 2, 1 whatever, just want to be able to make and receive calls and leave that sad alcatel I’m using behind me, hehehe.

  24. Al

    Hi,
    My 3Gs was unlocked and activated. I was able to use an unregistered sim without a data plan on it. I had to run it on blackra1n every time that I plugged it into the computer. However, I accidentally upgraded it to 3.1.3
    I’ve tried restoring it with various custom IPSW files from different programs (I’ve even tried 3.1.0, 3.1.1, 3.1.2, and IOS 4) but my phone refuses to restore or restore unlocked. It still keeps asking for a valid sim. Sometimes, Itunes tells me that the “device isn’t eligible for the requested build”. I can’t use redsn0w because no matter what IPSW I try to use with it, it cannot be recognized. Sn0wbreeze did not work either. I’ve tried on both a MAC and a PC.
    According to forecast, my phone can be jailbroken but not unlocked. Bootloader is 6.4.
    Any help would be greatly appreciated, thanks!

  25. Nabeel

    is your iPhone currently activated? when you connect it to iTunes, what message does it show?

  26. Luis

    quick update
    so I’ve decided to go to orange to see what they can do, and on my way there the phone suddenly have full signal and the carrier name (orange). I’m so thrill! so I try and make a phone call but it doesn’t work. I go back home and try to make a call to it, but it doesn’t work either. Removed the sim, put it back in and again, no service.
    WTF?

  27. Nick

    Hello, my 3g is not jailbroken in anyway. I’m not sure how to do this

  28. Nabeel

    ok so it appears to be the sim jack problem! try this:

    1. use the same sim on some other iPhone first to confirm (use on other iPhone only)

    2. use some one elses sim + their iPhone sim holder jack in your iPhone

  29. Nabeel

    what’s the firmware and is it activated and working properly?

  30. Nick

    Its not activated, i just upgraded. its iOS4, but it is working properly

  31. Nabeel

    Please tell me:

    1. what firmware was it on before upgrade, and was it working properly at that time? was it jailbroken + unlocked at that time?

    2. how did you upgrade? (using iTunes upgrade feature ? )

  32. Nick

    1. the latest version of 3.0 and it was never jailbroken
    2. Yes, through itunes

  33. Nabeel

    you said it is not activated but working properly? what does it mean? are you able to use it and call from it currently?

  34. Nick

    Its not activated. I can not call from it. But everything else works

  35. Nabeel

    Can you unlock the phone and see the homepage icons? if yes then goto settings and see if wifi and bluetooth can be turned on / off properly and tell me the result

    if you cant see the homepage icons, then you need to follow this tutorial to jailbreak it first: http://nabtron.com/how-to-jailbreak-ios-4-0-with-redsn0w-0-9-5-on-windows/2041/

  36. Nick

    I can still see the icons on my homepage

  37. Nabeel

    ok great, please tell me if wifi and bluetooth are functional

  38. Nick

    they give the option to connect to other devices so yes

  39. Al

    Thank you for responding!

    “There is no sim card installed in the sim card you are attempting to activate.”

    My sim does not have a data plan and so it shouldn’t be able to work under normal locked and non-jailbroken circumstances, right?

    Also, I’ve tried using somebody else’s registered sim with a data plan but it still went unrecognized.

  40. Nabeel

    ok great, so you can jailbreak it using the tutorial link: http://nabtron.com/how-to-jailbreak-ios-4-0-with-redsn0w-0-9-5-on-windows/2041/ and then unlock it.

  41. Nick

    its said that they page was not found

  42. Nabeel

    you need to enter any AT & T sim in it to activate it first with iTunes so that it can work further.

    There is activator out there but it’s not well developed yet.

  43. Nabeel

    the link that i posted above? it’s working fine! just click on it!

  44. Nick

    Okay now its working. But the download link isnt

  45. Al

    Even if I am not from America, an AT & T sim would still work?
    How risky would it be to use this new activator? All my information and phone memory has been wiped out so I’ve really got nothing to lose in terms of memory.

  46. Nabeel

    the new activator is not tested by public yet! so you can think of any risk! :)

    and yes At & T sim should work in any case (usually) if you can make your hands on it around you. Try going to some mobile phone dealers and repair shops they may help you.

  47. Nabeel

    they changed the file version so the link was not working,

    please try again now, i have updated it with the new ones

  48. Matt Leonhardt

    If you can help me it would be much helpful.

  49. Al

    Hi again Nabeel,

    First of all, thanks again for all your help. I managed to get my phone to work. I just needed to use a sim from the country in which it was activated. So now my phone is working but only like an IPod touch. I am now trying to unlock it so that it can use any sim. According to f0recast, my phone cannot be unlocked. Does this indeed mean that there is no hope for my phone to be used with any other carriers?

  50. Nabeel

    email sent on your email id associated with this comment.

  51. Nabeel

    can you gimme some more info about why it can’t be unlocked?

    you need to jailbreak it first to be able to unlock it for any other carrier.

  52. Al

    I think that it cannot be unlocked because of the 6.4 bootrom and the fact that it is upgraded to OS 4. I’ve tried using redsn0w to jailbreak it but whenever I try to do the first step, it refuses to recognize my IPSW.

  53. Nabeel

    if it refuses your IPSW it means that it is having some error far before checking for your bootrom

    make sure you are using the ipsw and redsn0w of the same compatibility

  54. Chris

    what does activated mean? does it just mean that it goes with a original carrier simcard and that one knows the pin and everything or what?

    thanks

  55. Chris

    what does “activated iphone” mean? does it just mean that it goes with a original carrier simcard and that one knows the pin and everything or what? i, for example, know the passcode of my iphone, i can use the web, connect it to my itunes, organize music, and all kind of stuff besides making and receiving calls, i just don´t know the pin of the french simcard thats in there.( i am in germany and want to use it with a german card).
    so can i use the here descriped unlocking and jailbreaking solution, or should i try and get a original carrier simcard with a pin i know? (iphone 3g on 4.0 and 5.13.04)
    thanks for your help

  56. Nabeel

    activated means when you connect it to iTunes it don’t give any error that the sim card is not supported or the iPhone is not activated, instead it gives normal options like update and restore etc.

  57. Nabeel

    your iPhone is activated currently. You can Jailbreak and unlock it safely (but you may need original carrier sim and its pin (you can contact the carrier service provider to know the pin) in some step when connecting to iTunes – not necessary)

  58. josh

    can i get some1 2 jailbreak it 4 me?

  59. Nabeel

    where do you live sir?

  60. hassan

    hi..
    i did email you yesterday..
    can you virtually assist me please

  61. Nabeel

    Hello hasan, i was in bit busy schedule on week end, i will be contacting you on your email address tomorrow inshaAllah.

  62. hassan

    can you fix it then online?

  63. Nabeel

    hopefully yes

  64. hassan

    i told you the issue.its ugraded to os4 and locked in at&t.and its in emergency mode.no homepage or anything its stuck.
    and i dnt have at&t sim available in UK.so can we start to fix it..even if we cant jailbeark .i want to get rid of emergency mode

  65. Nabeel

    Jailbreak is needed to bypass the emergency mode

    however, jailbreak can be done without activating with At & T but unlock can be an issue.

    I will discuss it with you before starting to hack your iphone

  66. hassan

    so can we start it the virtual process

  67. Nabeel

    I will be able to do that tomorrow for you sir.

  68. Lladro figurines

    Hi I have a Samsung A767. My IMEI number is 355197/03/043390/3. Can you please get me the 8 digit unlock code! Thank You very much!

  69. Nabeel

    you’ve to contact the cellular network service provider to find that pin

  70. hassan

    hi..
    so can you fix it today?

  71. Xavier

    cant jailbreak 3gs on att network w/ os 4.0 and bb 5.13.04. tried redsnow 0.9.5b5-3 and snowfreeze but ipsw are not working properly.

  72. Nabeel

    did you download the ipsw and install it via shift restore on your iPhone?

  73. Genia Berestetsky

    Please help me out — I want to jailbreak an iPhone 3gs with 4.0. I upgraded it through iTunes from 3.1.3 and now it won’t work :-( Any help would be great.

    Thank you,

    Genia

  74. Dan

    Hi

    Hi! I am from india. I have upgraded 4 os and now my iphone is not working. It says no Service. I have tried putting other sim cards still it is showing no service mode. How to fix this? For jail break i did like and now its not working. Please guide me to solve this issue.

  75. Vesna

    iPhone 3GS firmware 4.0, not jailbroken.
    Purchased it without lock in 12/09. Operated with european SIM.
    Got white screen problem fixed in an apple store in USA, since then my phone does not accept my sim card or any sim card. Phone is recognized in iTunes but says: no sim card

    Please guide me to solve this issue. Thanks.

  76. Sifat

    Hi Nabeel,
    As-Salaamu-A’laikum,

    I have seen all of the above messages but can’t figure one that matches exactly my problem. Yesterday, being a stupid, I just restored my iPhone 3GS 3.1.2 with new iOS 4.0, downloaded through iTunes. Now I’m stuck. It only shows me the “Emergency call” screen. I can do nothing. Connecting with iTunes says, you know, “The SIM card is not supported” sort of messages.

    How can I downgrade it to 3.1.2 or Jailbreak it? Is there any way, I can know my current baseband/firmware details? I don’t have any At&T SIM around me, and there is no luck that I will have one in near future. I am from Bangladesh (Time GMT+6).

    Thanks for you help.

    –Sifat

  77. Sifat

    Hi!
    Me also facing same problem? You fixed it? Please share how..

    –Sifat

  78. Nabeel

    you need American (probably AT & T) sim to activate it first (if you follow proper procedure)

  79. Nabeel

    was your iPhone jailbroken at 3.1.2 before you upgraded it to iOS 4.0?

  80. Nabeel

    what problem are you facing exactly sifat

  81. Nabeel

    you need to unlock it after jailbreaking to use it with your local sim cards

  82. Nabeel

    did you jailbreak + unlock it?

  83. kiddcliffardo

    Hello I had jailbroken my iphone 3gs before and used it as an ipod touch. Now since i upgraded it to 4.0 I can do anything it’s stuck on those two screens that says Connect to itunes then when i Slide it it says emergancy calls only pleasee help meeee!

  84. Nabeel

    where do you live? and was it “unlocked” too before upgrading?

  85. kiddcliffardo

    I Live in United States, and No.

  86. Nabeel

    You can jailbreak it using this method:

    http://nabtron.com/how-to-jailbreak-ios-4-0-with-redsn0w-0-9-5-on-windows/2041/

    Once it’s jailbroken you can unlock it too using:

    http://nabtron.com/how-to-unlock-iphone-3g3gs-on-ios4-with-ultrasn0w-baseband-05-13-04-to-04-26-04/2054/

    lemme know if you have any trouble understanding the process

  87. kiddcliffardo

    It’s not working for the jailbreak because it cant find the ipsw file.

  88. Nabeel

    did you download the ipsw file from the link provided in the article ??

  89. Sifat

    Actually it was jailbroken before I upgraded to iOS 4.0. I can remember I saved the shsh blobs on Cydia. But later I tried to get it through tinyumbrella and failed.

    It seems I’m stuck now. Can’t see any hope.

    –Sifat

  90. Michelle

    Hi,
    I just bought an unlocked/jailbroken iphone with 4.0 and firmware 5.13.04 and am using Tmobile. It wont load carriers, there are no fields to enter the apn information and when I put my SIM in, it shows me Tmobile and full bars at the top plus the uppercase E for edge but it only lasts about 6 seconds then the phone starts searching. I am able to go online using wifi but at this point that is all I can do. I received a text message but as soon as I did, the phone started searching again and I never got a chance to answer.
    Please Help.

    Virtual assistance requested

  91. dennis

    my phone is: 3GS running iOS 4 with firmware 05.13.04

  92. Eri

    Bleh. 4.0.1 redsn0w is giving me an unspecified err.

  93. Dillon

    Hey! I have been looking all night at these amatuer websites about how they can do this and that to my phone lol. Then I came across this website and didn’t think twice.. I’m wanting to get it “jailbroken” and unlocked so if there’s any possible way you could help me I’d really appreciate it :) Thank you, Dillon.

  94. Nabeel

    did you get it jailbroken / unlocked? what are the specs of your iPhone?

  95. Nabeel

    are you trying to load iOS 4.0.1 on redsn0w ? you need to use 4.0 version with redsn0w (it will jailbreak 4.0.1 too)

  96. kiddcliffardo

    Heyy i have the iphone here i need to kno which sites to go to jailbreak other that
    Redsnow
    Snowbreeze !
    it’s an
    iphone 3gs 16gb it was jailbroken before but i forgot if it was spirit or not

    PLEASE HELPP !

  97. Nabeel

    you can try the redsn0w jailbreak, if it won’t work, then in worst case, you would have to re update your iPhone only hopefully

  98. kiddcliffardo

    when i try to use red snow and i use my downloaded ispw file it says it could not connect it.

  99. Abraham PAul

    i am a fresher please help me..

  100. Nabeel

    What’s your iPhone model and firmware version

  101. Abraham PAul

    its 3GS and 4.0.1

    unable to recognize specified ipsw THIS ERROR IS COMING

  102. Abraham PAul

    i tried it with iPhone1,2_4.0_8A293_Restore its working
    but wit iPhone2,1_4.0.1_8A306_Restore its not working!!!

    cAN U help me please!!

  103. Nabeel

    because you are trying 4.0.1 for 3gs sir! download the 4.0 of 3gs!

  104. Abraham PAul

    can u send me a link to download 4.0 boss

  105. Abraham PAul

    iPhone2,1_4.0_8A293_Restore i tried with this my frnd.. but same error and tried with sn0wbreeze-V17 it giving me a warning that if that device is not jailbroken already it wont work..

  106. Abraham PAul

    can i have a chat with you.. can i have your email id..

  107. Nabeel

    do you use msn / yahoo messenger?

  108. Abraham PAul

    ya i use yahoo friend

  109. Nabeel

    id please

  110. Abraham PAul

    *****@yahoo.com thnks mate

  111. Nabeel

    did you try restarting your computer + iPhone?

  112. Abraham PAul

    did u add me

  113. Nabeel

    added you

  114. Nabeel

    yap

  115. Abraham PAul

    when do you come online usually !!! say it in IST.. where r u now??

  116. Nabeel

    i am online

  117. Nabeel

    sorry for late response, were you able to fix your issue?

  118. KostaElGreco

    Hey there,

    I just got my iPhone 3GS 8G last week and am looking for a way to jailbreak it, I keep seeing on sites that there is no way to jailbreak from version 4.0.1 if you didn’t have a jailbreak via redsn0w on 3.1.3 due to that update being the only temp fix for now.

    I would like to know if there is any info you could give me, such as if there is a way to do it, and if so, pls let me know how so i can get this started, I would greatly appreciate it

    My model iPhone is A1303, and firmware is 05.13.04, thanks for your help!

  119. KostaElGreco

    *correction*

    My model number is MC637C, Version 4.0.1 (8A306), firmware 05.13.04

  120. Nabeel

    if it’s on new bootrom then you need to wait until the new jailbreak is released.

  121. KostaElGreco

    any chance there is any info on this pls? Thanks!

  122. Nabeel

    I am not sure what could be the issue (maybe re installing and jailbreaking needed – don’t do it unless you know the process completely)

  123. Nabeel

    info about?

  124. Nabeel

    Have you tried jailbreaking it?

  125. Luis Moreno

    nothing

  126. Nabeel

    ???

  127. ABRAHAM

    HEY NABEEL REMEMBER ME???.. IS IT OUT FOR NEW BOOT ROOM??

  128. ABRAHAM

    I DID UNLOCKING FROM O2 DIRECTLY!!!! AT LAST :o

  129. Adrian

    Hi My girlfriends iphone 3g 8gb was jailbroken, I can’t remember by who however I stupidly updated it by itunes and locked it again. She had it opened to any network, I’m trying to get it back to that and install the 4.1 firmware. I’ve downloaded Redsn0w and tried to install the downloaded software however it keeps saying ‘unable to recognise specified ispw’. Any help would be much appreciated!!

  130. Nabeel

    have you been able to solve this issue? check this post to fix this error: http://nabtron.com/how-to-fix-unable-to-recognize-specified-ipsw-error-in-redsn0w-0-9-5-with-ios-4/2124/

  131. Barney

    Hi, I have an iphone 4 OS 4.0.0 it hasn’t been activated yet and I would like to jailbreak and unlock. could you please assist?

  132. Nabeel

    where do you live Barney?

  133. Nabeel

    how much did it cost? and where did you get it done from?

  134. Nabeel

    is your iPhone still locked?

Leave a Reply

Your email address will not be published. Required fields are marked *