There might be various reasons due to which your evo wingle is not working properly. In this post we will see various steps to troubleshoot the evo wingle 3g not connecting and how to fix the evo wingle connection failed issues.
Following are the most common issues due to which the ptcl evo 3g don’t work or connect properly, so make sure that you’re not having any of those issues before taking it to the shop. Almost all steps apply to evo 4g (evo charji) too and not just to ptcl but to zong and mobilink device also.
1. Check evo package expiry date
Make sure that your ptcl evo wingle package haven’t expired yet.
How to check evo package expiry date?
The only possible ways to confirm the expiry date of your current ptcl evo wingle package are:
- Remember the last date that you recharged your prepaid evo wingle, so it remains active for a month only
- Call ptcl helpline to check and confirm if your wingle package has expired or is there any other issue
2. Does your evo has remaining data?
One of the main issue for evo not working is that it runs out of the data limit that we can use in our subscribed package.
How to check remaining volume of evo wingle
If you’re following or can check the evo portal by going to 192.168.1.1 on your browser, then you can check that by logging in to the portal and checking the “Statistics” page from top menu.
Another way is by installing a bandwidth monitoring tool in your windows laptop or macbook to monitor how much data in out is occurring.
3. Is your socket or usb port stable?
This can be a real and often neglected factor too. Sometimes usb ports of laptops or wall sockets and adapters which we’re using to connect our evo 3g (doesn’t apply for charji devices which run on batter) are lose.
Changing the sockets can help confirm.
4. Is your evo wingle receiving enough signals
Make sure that evo wingle is in signals coverage area. You can check by using the evo wingle in the area where it received good signals previously, to confirm if the issue is with evo signal coverage or something else.
If it’s the signals issue, then you might need ptcl evo signal booster to enhance evo wingle signal range.
5. Reset your evo wingle device
If nothing above works then one good option is to reset your device. Note that it will reset the wifi name and password too and the evo admin panel login and password too. You can see the wifi name and password on the inside of your evo wingle device by removing the sliding cover.
Let me know if you’re still having any issue with your evo wingle device.