iPhone MMS settings for Pakistan Cellular Networks (warid, ufone, mobilink, zong, telenor)

(If you are looking  for gprs/edge settings for cellular networks in Pakistan (warid, ufone, mobilink, telenor, zong), please check this page: http://nabtron.com/internet-edgegprs-settings-on-iphone-2g3g-telenor-ufone-warid-mobilink-pakistan/ )

These are the manual settings for cellular networks mms settings for Pakistan. These settings has been tested on iPhone 3G version 3.0 but should work on anyother mobile / cell phone too.

These settings has been last updated on: 7th June, 2010.

Note:

1. If you are activating mms on your sim for first time, you probably need to call on the service center to get it activated first

2. Please remember to restart your iphone after entering the mms settings to make them work.

3. Please enter the number of the person who you are sending mms to in format: 923xxxxxxxxx (thanks to zahman May 16, 2010 at 12:07 pm )

3. When entering mms settings also enter the same APN for cellular data that is mentioned for mms APN below for your network (verified for warid – thanks to Qassim) But not for ufone and Zong (verified by Muhammad Ali)

4. You might need to enter the MMS Max Message Size: 51200 to avoid error message rejected due to operator SLA violation (verified on warid network – thanks to Qassim)

mms settings for iphone pakistanWarid Pakistan MMS Settings (for iphone and other cell phones)

(updated: 19 feburary, 2010 – thanks to Qassim)

APN: mms.warid

Username:

Password:

(Username and password are blank for warid Pakistan mms settings)

MMSC: 10.4.0.132/servlets/mms

MMSC Proxy: 10.4.2.1:8080

MMS Max Message Size: 100

(It’s important to enter mms max message size to avoid error message rejected due to operator SLA violation )

MMS UA Prof URL:

(mms ua prof url is blank for warid Pakistan mms settings)

Ufone Pakistan MMS Settings (for iphone and other cell phones)

APN: ufone.pmms

Username:

Password:

(Username and password are blank for ufone Pakistan mms settings)

MMSC: http://www.ufonemms.com:80/

MMSC Proxy: 172.16.13.27:8080

MMS Max Message Size: 512000

MMS UA Prof URL:

(mms max message size and mms ua prof url are blank for ufone Pakistan mms settings)

Mobilink GSM Pakistan MMS Settings (for iphone and other cell phones)

APN: mms.mobilinkworld.com

Username: mobilink

Password: mobilink

MMSC: http://mms

MMSC Proxy: 172.25.20.12:8080

MMS Max Message Size:

MMS UA Prof URL:

(mms max message size and mms ua prof url are blank for Mobilink Gsm Pakistan mms settings)

Telenor Pakistan MMS Settings (for iphone and other cell phones)

APN: mms

Username: Telenor

Password: Telenor

(T is capital for Telenor in username and password for Telenor Pakistan mms settings)

MMSC: http://mmstelenor

MMSC Proxy: 172.18.19.11:8080

MMS Max Message Size:

MMS UA Prof URL:

(mms max message size and mms ua prof url are blank for Telenor Pakistan mms settings)

Zong Pakistan MMS Settings (for iphone and other cell phones)

[Thanks to Mr. Khurram Khan for providing correct mmsc proxy for zong mms settings on iphone in Pakistan.]

[Last Tested and confirmed by Zulqarnain 2010/07/06 at 11:24 pm]

APN: zongmms

Username:

Password:

(Username and password are blank for Zong Pakistan mms settings)

MMSC: 10.81.6.11:8080

MMSC Proxy: 10.81.6.33:8000

MMS Max Message Size:

MMS UA Prof URL:

(mms max message size and mms ua prof url are blank for Zong Pakistan mms settings)

For mms to work, make sure gprs/edge is working on your cell phone. For gprs/edge settings for cellular networks in Pakistan (warid, ufone, mobilink, telenor, zong), please check :

http://nabtron.com/internet-edgegprs-settings-on-iphone-2g3g-telenor-ufone-warid-mobilink-pakistan/

191 comments on “iPhone MMS settings for Pakistan Cellular Networks (warid, ufone, mobilink, zong, telenor)

  1. I have done the settibgs for telenor mms n gprs but still mms is nt workinh as the sending bar is about to complete network is lost n iphone is again searching for signals n says no sim card inserted i treid it with mobilink n telenor both
    plz help me
    waiting for your reply

    1. please let me know, that it only drops signals when you try to use mms? or does it drop signals otherwise too? in my opinion, this is not mms settings issue, rather probably it’s your iphone OS issue,

      one more thing to note is, that when it says no sim card inserted, this issue is usually when sim card size is short (like warid sims, you have to ask them to configure your prepaid account on their post paid account to make it work with iphone) , other reason could be that if you frequently change sims in your iphone, then it might damage the holding slot for the sim.

      anyway, just let me know if the signals not found, or sim not found error occurs on iphone only while using mms or otherwise too.

  2. Its only doing it while sending mms and it gas never shown any error msg lyk that before :(
    and the slot thing: though i have changed the sim in the iphone but nt that much :$
    please let me know if there is sum way out
    thanks alot dear

    1. i am not sure what could be the cause of this . . . r u using iphone 2g/3g? and which firmware version? 2.2, 3.0, or 3.1?

  3. Please try this:

    1. did you ask and confirm from the service center that gprs and mms is active on your number?

    2. did you check by sending mms via any third party application?

    3. did you (and can you) upgrade your firmware to 3.1 (do not attempt by just clicking on update button in itunes, it will block your iphone forever)

  4. The MMS settings for zong are incorrect….the correct settings are:

    APN: zongmms
    Username:
    Password:
    MMSC: 10.81.6.11:8080
    MMSC Proxy: 10.81.6.33:8000
    MMS Max Message Size:
    MMS UA Prof URL:

    1. Thank you Mr. Khurram for providing the correct settings for Zong mms. Updated the article with special thanks to you :)

  5. @Ahad, you need to have either mms application from any third party, like swirlymms, or else you need to have iphone firmware version 3.x to get mms settings done from iPhone by default. Lemme know how you need further help :)

  6. hey bro i have tried the settings from your website aswell as from the ufone customer help center but i just cant seem to get it working even though my iphone 3g has a mms option which gets activated when you enter proxy in mms settings my gprs is working but mms arnt can you lemme know whats wrong and if i need to use some application can you tell me where to find i’ll appreciate it !

  7. APN: zongmms
    Username:
    Password:
    MMSC: 10.81.6.11:8080
    MMSC Proxy: 10.81.6.33:8000
    MMS Max Message Size:
    MMS UA Prof URL:

    MMS setting not working on my iPhone 3G
    can anyone help me

    1. Danish, these settings were verified by me personally on my friends iPhone only a week ago

      please check if you have working gprs or not

      also make sure that you restarted your iPhone

      otherwise contact their service center to first enable gprs / mms for your number

      Please let me know if your problem gets solved.

  8. Hi, great site, thank you.

    I came here for a visit with a factory unlocked iPhone 3GS and a Blackberry.

    The iPhone is working fine but it is using money faster than I can buy cards for (250 Rupee in one day) and yet I haven’t been using any data services that I am aware of except when I am in a wi-fi area. What can I do, I am using a prepaid Telenor account.

    also, the Blackberry was working fine when I first got here. I got “EDGE” but now I get “edge” and no emails. Any advice very welcome.

    Thank you

    1. Do you have push notification and mail enabled on your iphone? that might possibly be using the bandwidth all the time for data transfer.

      Imho, there are some settings that need to be changed on your iphone and an application will make your life easier!

      I assume that you live in my city Islamabad (as per your ip), let me know if you need any assistance regarding this.

      1. Hey thanks Nabeel, just visiting Islamabad, I might take you up on your offer. So I turned ‘push’ off, I had already set the Fetch to manual, thought this would mean that mail only downloaded when I went into an inbox etc.

        Would be good to be properly set up.

        Thanks again.

          1. ASSALAM U WALIQUM NABBEL.

            Mera Iphone lock hogaya hai , USA se unlocked karwa k le kar aya tha , but software upgrade karnay ki waja se woh dubara usii condition mien aagaya hai , now , tell me the process to unlock again , to run in pakistan.

            I will be Very Thankful to YUu.

  9. aoa…im looking for mms settings for my G1 android phone….my Edge works great, but the phone wont send mms or receive…..network is ufone…i use the ufone.pinternet profile for internet and have tried all combinations of settings to see if mms works….ufone.pmms etc….please would somebody help? *****@hotmail.com [edited by admin]

      1. full ho ya any other for mms app i jst confiq gprs setting and mms want to check send and recv is working or not…. Thanks man
        btw my phone is jailbrokn

  10. Does anyone have working mms settings for Ufone for G1 Android? my edge works perfectly but i cant seem to be able to send mms with it…

  11. AOA NabeelHow are you hope you are good, i am having a problem and i need your help, i am using Iphone 2g i have just downloaded cydia and installed settings for mms, but when i tried to enter settings for MMS just Proxy stayed other settings got wiped every time i exit from settings or rebot my please help me in this regard, i am mobilink user, thanks and take care farrukh

    1. Thanks For your reply, i live in lahore, well isn’t there any other way to resolve it,, means any other way to send and receive mms. i feel like INDIANA Jones, LOl. as i am searching since this morning but didn’t get any clue how to reslove it,

      regards
      farrukh

      1. sir i have ufone……general settings might work,ill tell u the field in my apn
        apn:
        proxy:
        port:
        username
        password:
        server:
        MMSC:
        MMS proxy:
        MMS port:
        MCC: 410 (for pak)
        MNC: 03 (for ufone)
        APN Type:

        for the internet, i just use the apn name as ufone.pinternet…..dunno wt to do abt mms….make a separate apn ,..? or use the same with diff settings?

  12. Thanx alot brother..i just configured all the settings and re-started my iphone 3g and there it was..the camera option..thanx alot :)

  13. Friends, Romens and Country men!!!!!! hi there…. well let me help you with this mms problem…. there is no need to install the 3rd party mms application… it sounds a bit weired but YES!!!! THERE IS NO NEED TO INSTALL THE 3RD PARTY MMS SOFTWARE….

    all u need to have is 3.0.0 firmware for ur iphone even if its 2g or 3g…. do the following settings and i can bet they can work as i have been woundering around n surfeing the web like anything for this problem and this is how i finnaly managed to do it…. welli have a warid connection and i know about the warid settings only… however Nabeel can for sure help you all for other network settings…..
    here are the settings as written in my cell,,,,,

    go to settings -> general -> network -> cellular data network …

    there on the top its written

    “cellular data”
    APN mms.warid
    username
    password

    (leave the username and password blank)

    (when you scroll down)

    MMS

    APN mms.warid
    username
    password

    (leave blank as done in the above)

    MMSC 10.4.0.132/servlets/mms
    MMS proxy 10.4.2.1:8080
    mms max message size 51200
    mms UA prof url

    (leave blank)

    after writting the settings do remember to restart ur iphone…. VOLLAAAAAAA….

    it will work for sure… the actual problem and mistake we all were doing is not entering APN info the same in cellular data as we did in mms settings… iphone by default has this issue that when we enter different APN it gives the conflict and the mms is not sent…. i did this all on hit n trial method n now this is how m easily sending MMS anywhere around the world…

    and ya you do have to enter the max. message size otherwise after sending the mms you will get an error demon message that “message rejected dur to operator SLA violation” (this is becauz of the increase mms size)

    the above mentioned stuff has already been tried and easily tested by me….

    now Nabeel jani… you got to help the ppl cuming around here for help… i hope you will check and update accordingly… ENJOY……

  14. Nabeel you are really doing a nice job man … helping others with really gud technical prblms..

    Thanx for the zong mms settings .. it really worked for me flawlessly ..

    Keep up the gud work bro.. 2thumbs up for u … Help Appreciated… !!!

  15. hello sir!! im having sort a problem,as soon as i started using my iphone 3gs..im not able to turn off Edge,and it cost me too much as it never gets off.. and im telenor’s user..would u tell me dat can telenor’s service centre would help to turn off GPRS or Edge???

    1. Hello Rida, you need to install an application called sbsettings on your iPhone to manipulate various settings including edge. Please let me know if you need help in finding and installing it.

      1. i use telenor bt i dont know how to do in warid when i write all these things in my iPhone settin then a camera option came in the msg bt when i wannna send the mms then it dont send it

        1. i will recheck the settings on warid myself tomorrow and let you know if they still work

          but you confirm that the telenor settings are working fine right?

  16. I have tried the above described MMS settings for the ZONG network on my iPhone 3GS, OS 3.1.2 and am happy to say that they work.
    You have to restart your iPhone after entering the settings though in order for them to work.
    Special thanks to Nabeel and Khurram Khan as they have obviously done a better job than ZONG’s own tech staff.
    Regards,
    Ali

    Note: I left the “Cellular Data” part of the settings completely blank as the iphone accesses the internet without any settings while only on cellular network.

  17. salam
    dear qasim i followed ur same settings as u posted in last reply for waridtel
    but mms still not sending
    i m using iphone 3gs version 3.1.3

  18. Im using the setting that are posted up for my 3G firmware 3.0.1 ,but wanted to upgrade to 4.0 ,but before I did that just wanted to knw if the same settings

  19. Im using the setting that are posted up for my 3G firmware 3.0.1 ,but wanted to upgrade to 4.0 ,but before I did that just wanted to knw if the same settings would work with the new firmware…and any ideas if there are any issues with applications upon upgrading!!!

    1. If you are having an iPhone 3G then i will recommend that you preferably DO NOT upgrade to iOS 4.

      I will tell you the reasons by tomorrow inshaAllah (through a post)

  20. Hi I’m using iPhone 3GS 3.1.3and the settings have worked but the mms is not sending even though I have the mms package turned on????

  21. thanks a lot bro!
    worked fine for me zong mms and internet settings……….just had to turn ma cell off and on again to get the settings working
    hatsb off to u mates..

  22. @nabeel
    hey bro i tried using ur settings 4 warid but cat send n receive mms…currently hv iphone 2g fw 3.1.3 n using registered version of swirly mms…so help me out

    1. you don’t need swirly on 3.1.3 Aqib. The settings are for iPhone builtin mms settings. Make sure your internet is working before you try for mms

  23. can any one tell me how to enable mms on iphone 2g fw 3.1.3….i searched alot but cant find any thing…:(

  24. I thought there would an issue with OS4 regarding mms on it even though for reference the warid ppl said that they have the mms settings for OS4….. I would believe them if they had helped me out on the 3.0 OS so now im just gona wait for your go ahead!!!

      1. ufone setting is not working on my 3gs ver 3.1.3, the camera icon is there but when i try to sent pic it just come to 80% then didnt sent. my net is working perfectly right

  25. Ufone Pakistan MMS Settings (for iphone and other cell phones)

    APN(PREPAID): ufone.pmms
    APN(POSTPAY): ufone.mms

    Username:

    Password:

    (Username and password are blank for ufone Pakistan mms settings)

    MMSC: http://www.ufonemms.com:80/

    MMSC Proxy: 172.16.13.27:8080

    MMS Max Message Size:

    MMS UA Prof URL:

    (mms max message size and mms ua prof url are blank for ufone Pakistan mms settings)

    [it works properly on my iphone 3g os4, and yeah make sure you send max.300kb size.]

      1. thats all the setting that works for me …
        and thats why i also mention prepay and postpay apn as well …
        and yeah i got these all the settings from UFONE!

        ReGarDs,
        -ehSan

  26. mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user
    pawd

    100% tested on iphone 3gs 0s3.1.3
    other wise try this settings on iphone i got this setting from official iphone application

    mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.pmms
    user ufone
    password ufone

    mmsc ufonemms.com/
    proxy 172.16.13.27:8080
    apn ufone.mms
    user ufone
    password ufone

    mmsc ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user ufone
    password ufone

    mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user ufone
    password ufone

    mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user
    password

    mmsc http://www.ufonemms.com/alias=pp
    proxy 172.16.13.27:8080
    apn ufone.mms
    user
    password

  27. i got this setting from the iphone official application :) u can try 1 of them its work:) lemme guide u abt iphone 3gs os 3.1.3

    mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user
    password
    100% tested on iphone

    mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.pmms
    user ufone
    password ufone

    mmsc ufonemms.com/
    proxy 172.16.13.27:8080
    apn ufone.mms
    user ufone
    password ufone

    mmsc ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user ufone
    password ufone

    mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user ufone
    password ufone

    mmsc http://www.ufonemms.com
    proxy 172.16.13.27:8080
    apn ufone.mms
    user
    password

    mmsc http://www.ufonemms.com/alias=pp
    proxy 172.16.13.27:8080
    apn ufone.mms
    user
    password

    1. umair, your comment was in my spam list, can i know your browser and operating system that you used to post this comment?

      and that application you used . . is it swirlymms?

  28. I am using iphone 3gs with latest OS and firware. Before updating my mms was working perfectly on mobilink and i was able to send and receive photos thru mms. After the upgrade, i have used the same settings, gprs is working fine. I can send mms which other people recieve but i am unable to receive mms from other cells / networks. Please help me to sort this out.

  29. Somebody please post the Ufone (Prepaid) and Jazz MMS Settings for Chinese phones…
    Help will be appreciated…

    Regards

  30. Ufone Gprs & MMs settings for iphone 3gs version 3.1.3

    MMS Settings

    APN ufone.pmms

    MMSC: http://www.ufonemms.com:80/

    MMSC Proxy: 172.16.13.27:8080

    MMS Max Message Size: Leave BLANK

    MMS UA Prof URL: Leave BLANK

    GPRS Settings

    APN ufone.pinternet

    Username: Leave BLANK

    Password: Leave BLANK

    1. thanks for the settings!

      btw, your comment was in my spam folder, can you please tell me your browser and operating system so that I can look into this issue?

  31. hello, i am using iphone 3G 8GB its firmware is 4.0.2 and my network is ufone. my problm is that i can recieve mms bt cannot send all pictures. there are some pix which could be sent through mms bt mostly pix are failed to send. plz help me out?

  32. the settings are perfect i ve tested them on my 3gs and 3g..on.warid mobilink and ufone…those getting errors try this….resize ur pics through computer and make them less thn 100 kb and then send them via mms.im sure it will solve ur problem

  33. You are a God Send. Had been banging my head against the proverbial walls for ages trying to get the right settings for MMS on iPhone 3GS for Telenor. First time found ones which worked.

    God Bless!

  34. whats up guys ? i own an iphone 4 running os 4.1 on Zong. i have got this problem with mms where am able to recieve mms but cant send.
    by the way its not a factory unlocked plus i have the problem with facetime, it keeps me on `waiting for activation` hope you guys can get me out of this mess.
    thanks

  35. i hv iphone 4 n my network is waridtel my mms were working perfectly but for last few dayz itz not working …hv tried da setting provided here but no luck……..so plz can ne1 help me out???

    1. Do this: insert your sim in some other cell phone and see if mms is working for it on that cell.

      Which settings are you using for ward?

  36. Aaaaalllllllllllllaaaaaaaaaaaaaaa yar Thanks alot

    Works Perfectly on UFONE :D

    Was waiting to Receive a call from Ufone since 19-Apr-2011, didn’t get one. And got my MMS setup using this Website.

    Whoever shared this info, I am so very thankful to him You ROCK guy.

    God bless You!
    Regards
    Atif

  37. thnks guys my mms n gprs 4 zong r working good just add exactly these settings turn it off n on woo mms here i go….

  38. I’m using Zong’s cellular services on my iPhone 3GS, iOS 4.2.1 (Factory unlocked). Before updating my iPhone to this new 4.2.1 firmware, I was able to send and receive mms (OS 3. ‘something’). After updating my iPhone, I’m unable to send MMS. I’ve tried the settings but they’re ‘NOT’ working anymore (these settings worked fine before updating my device).
    Any idea?

    Of course, Zong’s public support team is clueless about the issue and are unable to understand the situation, customer service centers have people who don’t know how to open settings option in the phone.

  39. thanks a million buddy. have been looking for mms settings for a few months now. i can confirm these work on iphone 3g ios 4.2.1

    thanx again :)

        1. did you get your mms settings done successfully? if not then please contact me at: 0336******* i’ll try to help as much as i can.

  40. Thanks bro …… i never had a chance to send a MMS via Warid .. but i used these setting on my iPhone 4 (5.0.1) and its really works :D .. Thanks buddy

    1. glad to know that you finally used them to send mms from your iphone on warid network. These days whatsapp and viber etc are so common that mms is almost a thing of the past.

  41. these settings dont work anymore…..mein ne warid ki try ki thi on my iphone 5 lekin jab mein msg bhejti hu it keeps on saying not delivered

Leave a Reply

Your email address will not be published.